Wall Control Pro-Grade 5ft Metal Pegboard Tool Storage Kit - Galvanized Steel (30-COS-400 GV)
The Wall Control Pro-Grade 5ft Metal Pegboard Kit is a 20-gauge galvanized steel pegboard system covering 64" × 32" (14 sq. ft.) across four 32"×16" galvanized metallic panels, with a pro-grade accessory set including deep shelves, a dowel rod assembly, screwdriver holder, C-brackets, U-hooks, handle hangers, and 16 assorted hooks — available with Black, White, Red, or Blue accessories. Patented slotted hook system also accepts standard 1/4" round pegs. Limited Lifetime Warranty. Made in the USA. SKU: 30-COS-400 GV.
Industrial-Grade Steel Wall Storage. Five Feet of Galvanized Coverage. Pro-Grade Accessories for the Serious Tool Crib.
Standard masonite pegboard warps with humidity, cracks under load, and strips out at the holes after a few rearrangements. The Wall Control Pro-Grade 5ft Galvanized Kit steps up from the standard 4ft lineup with a fourth 32"×16" panel — extending coverage to 64"×32" (14 sq. ft.) — and a pro-grade accessory set that goes beyond bins and basic hooks: deep shelves, a 4" shelf with dowel rod assembly for tape, wire, and towels, C-brackets for bulky items, U-hooks for long-reach hanging, and handle hangers for power tool storage. The galvanized steel finish resists corrosion without a paint layer to chip or peel, and scratches blend into the metallic surface rather than exposing bare steel. The patented slotted hook system locks accessories in place so they don't fall out when you pull a tool — and the panels also accept standard 1/4" round pegs. No framework required: the pre-formed flange mounts directly to studs or drywall. Made in the USA. Limited Lifetime Warranty.
See it in action:
Another look:
Panel, Hook System & Accessory Specifications
Panels (4 included):
- Panel Dimensions: 32" × 16" each — 4 galvanized metallic panels total
- Total Coverage: 64" W × 32" H (14 sq. ft.) in standard horizontal configuration
- Material: 20-gauge galvanized steel — will not warp, fray, crack, or strip out at holes
- Finish: Raw galvanized metallic — scratch-concealing, corrosion-resistant without a paint layer, authentic industrial aesthetic
- Strength: 10x stronger than standard masonite pegboard
- Mounting: Pre-formed flange — mounts directly to studs or drywall; no framework required
- Origin: Made in the USA
- Warranty: Limited Lifetime Warranty against product failure and manufacturing defects
Hook System:
- Patented Slotted Design: Wall Control's proprietary slotted hooks lock into the panel slots and do not fall out when tools are removed — eliminates the primary failure mode of round-hole pegboard systems
- Standard Peg Compatibility: Panels also accept standard 1/4" round pegs — existing round-peg accessories from any pegboard system are fully compatible
- Magnetic Accessory Compatibility: Panels accept magnetic accessories including lights and socket holders
- Accessory Color: Select Black, White, Red, or Blue in the variant selector above
Included Accessories (pro-grade set):
- 1 × 6" Deep Shelf Assembly
- 1 × 4" Shelf with Dowel Rod Assembly — for tape, wire, towels, or cord storage
- 1 × Screwdriver Holder
- 12 × Standard Hooks
- 4 × Medium Hooks
- 2 × Handle Hangers (1-1/4") — for power tool handles and long-grip tools
- 2 × U-Hooks (3" Reach) — for deep-reach hanging of bulky items
- 2 × C-Brackets (1" × 1")
- 2 × C-Brackets (2" × 2") — for larger items and equipment
- Mounting Hardware & Anchors
- Note: Tools shown in photos are not included.
Installation, Configuration & Compatibility Considerations
- Stud Mounting: Pre-formed flange mounts directly to wall studs — standard 16" or 24" stud spacing compatible; use included hardware
- Drywall Mounting: Mounts to drywall with included anchors for lighter loads — for heavy power tools and equipment, stud mounting is recommended
- Panel Configuration: Four panels configure as a 64"×32" horizontal run (5ft+ wide, 32" tall) or split across multiple wall zones — panels are not permanently joined and can be repositioned independently
- Hook Locking: Slotted hooks lock into position — to reposition, tilt and lift; no tools required but hooks will not dislodge under normal tool-hanging load
- Round Peg Compatibility: Standard 1/4" round peg accessories fit the panel holes — existing pegboard accessories from other systems are compatible
- Pro-Grade vs. Standard Kit: This kit includes deep shelves, C-brackets, U-hooks, and a dowel rod assembly not included in the standard 4ft kits — suited for tool cribs, automotive shops, and heavy-use installations; choose the 4ft Galvanized Kit for a lighter-duty starting point at a lower price
- Need even more coverage? The Wall Control 8ft Master Kit covers 96"×32" (21 sq. ft.) with 6 panels and 40+ accessories
- Shipping: Ships via UPS/FedEx Ground within 1–3 business days — free to the lower 48 states
Comparing metal pegboard systems before you buy? Read our Wall Control vs. OmniWall technical comparison →
The GarageForm Difference: Technical Authority, Not Just a Catalog
Technical Screening: We don't list wall storage products without vetting them. The Wall Control Pro-Grade 5ft Galvanized Kit has been verified for steel gauge, panel dimensions, hook system compatibility (slotted and 1/4" round peg), and accessory specifications to ensure the performance data on this page reflects the actual kit — not marketing copy.
Direct Expert Support: We serve as your technical interface. If you need assistance selecting the right panel configuration for your wall layout, verifying stud spacing compatibility, or choosing between the 4ft, 5ft, and 8ft kits, our experts provide pre-sale consulting at no charge.
Straightforward Purchasing: Free shipping to the lower 48 states. If the Wall Control Pro-Grade 5ft Galvanized Kit doesn't meet your organizational requirements after delivery, our return process is handled by our specialized team — not a generalist call center.